Nantong Egens Biotechnology Co. Ltd

Model Number: strip-#5977 Brand Name: EGENS Key Specifications/Special Features: Introduction:HBeAg test is a chromatographic immunoassay in-vitro diagnostic test combined with conjugated colloid gold technology for the qualitative detection of hepatitis B E antigen (HBeAg) in human specimenTwo monoclonal antibodies are employed to identify HBeAg specificallyThis one step test is very sensitive and only takes about 15 minutesTest results are read visually without any instrumentSpecimen collection:For serum, collect blood into a container without anticoagulantIf the specimen cannot be tested on the day of collection, store the serum specimen in a refrigerator or freezerBring the specimens to room temperature before testingTest procedure:
To begin testing, open the sealed pouch by tearing
Along the notch, remove the test form the pouch
Immerse the strip into the sample with the arrow end pointing towards the sample
Do not immerse past the max (maximum) line
Take the strip out after 8-10 seconds and lay the strip flat on a clean, dry, nonabsorbent surface
Wait for pink bands to appear, read results within 10-15 minutes
Do not read results after 20 minutes
Interpretation of result:
1. Negative: only one color band appears on the control region, no apparent band on the test region
2. Positive: distinct color bands appears on the control and regions test
3. Invalid: no visible bang at all or only one colored band appears on test region, this is an indication of a possible error in performing the test, the test should be repeated using a new device